The relationship between maternal ornamentation and feeding rate is explained by intrinsic nestling quality

In altricial birds, parental feeding is essential, and its amount may depend on the quality of both parents. A relationship between parental quality and feeding rate is generally attributed to an active adjustment by parents in order to retain good quality mates or ensure high fitness through raising high-quality offspring. However, the behaviour and need of young may also change with parental quality, and this may affect parental behaviour. A further problem is that most studies have investigated post-hatching parental investment in relation to the secondary sexual signals of males, but not females. In a cross-fostering experiment, we examined the feeding rates of rearing parents in relation to the size and ornamentation of both original and rearing parents in collared flycatchers (Ficedula albicollis). Using this setup, we could examine whether the observed feeding patterns were the results of the decision of the parents based on their own and their partner’s traits or the constraints imposed by the behaviour or need of offspring. When correcting for clutch size and year, we found that feeding rate of both foster parents correlated with the wing patch size of the original female. This implies that original maternal quality had an offspring-mediated indirect effect on investment of foster parents, that is intrinsic nestling quality may constrain parental feeding decisions. This explanation should not be overlooked in future studies on preferential parental investment, and our results also point out that maternal ornaments deserve more attention in such studies.     

Dynamics of atmospheric polychlorinated biphenyls (PCBs): concentrations, patterns, partitioning, and dry deposition level estimations in a residential site of Turkey

Air samples were collected at a residential site (Gulbahce, Bursa, Turkey) between August 2004 and April 2005 using a modified high volume air sampler. The mean of gas and particle phase concentrations of polychlorinated biphenyls (PCBs) were 468 ± 297 and 43 ± 37 pg m^???3 (average ± standard deviation, SD), respectively. The dominated PCB homologs were 3-CBs, 4-CBs, and 5-CBs. The measured PCB concentrations were higher than the values of pristine sites. In order to assess the gas/particle partitioning fate, log K _P–log $P_{\rm L}^o$ , log K _P–log K _OA and the Junge–Pankow model were applied to the data. Experimental K _P was well correlated with $\log P_{\rm L}^o$ and log K _OA at p?<?0.05. Then, dry deposition fluxes were estimated using atmospheric concentrations and dry deposition velocities obtained from literature. A correlation matrix was formed for PCB homologs including 27 congeners with concurrently measured 16 polycyclic aromatic hydrocarbons (PAHs) and meteorological parameters. Most of PAH compounds were significantly correlated with 5-CBs and 6-CBs.     

Spatial distribution of polychlorinated biphenyls in High Tatras lake sediments

The objective of the present study was to gain insight on the spatial distribution of seven polychlorinated biphenyl (PCB) congeners in the High Tatras mountain range in Eastern Europe. Twenty high mountain lakes were sampled on their top-core sediment. Despite the relative uniform composition of PCB congeners among the lakes, there are important differences in the observed concentrations. Moderate top-core sediment concentrations of PCB congeners were observed (1.9 to 38 ng/g dw for ∑PCB) in comparison to other high mountain or Arctic areas. The variation in PCB concentrations can partly be explained by a possible altitudinal effect, resulting in higher PCB concentrations at higher (colder) altitudes. Part of this enhanced accumulation of PCBs could be caused by external factors (topography and meteorology) and internal lake factors (sediment dynamics). Many of these factors were not quantified for all individual lakes and their influence could, therefore, only be studied for some.     

Analysis of coupled model uncertainties in source-to-dose modeling of human exposures to ambient air pollution: A PM2.5 case study

Quantitative assessment of human exposures and health effects due to air pollution involve detailed characterization of impacts of air quality on exposure and dose. A key challenge is to integrate these three components on a consistent spatial and temporal basis taking into account linkages and feedbacks. The current state-of-practice for such assessments is to exercise emission, meteorology, air quality, exposure, and dose models separately, and to link them together by using the output of one model as input to the subsequent downstream model. Quantification of variability and uncertainty has been an important topic in the exposure assessment community for a number of years. Variability refers to differences in the value of a quantity (e.g., exposure) over time, space, or among individuals. Uncertainty refers to lack of knowledge regarding the true value of a quantity. An emerging challenge is how to quantify variability and uncertainty in integrated assessments over the source-to-dose continuum by considering contributions from individual as well as linked components. For a case study of fine particulate matter (PM_2.5) in North Carolina during July 2002, we characterize variability and uncertainty associated with each of the individual concentration, exposure and dose models that are linked, and use a conceptual framework to quantify and evaluate the implications of coupled model uncertainties. We find that the resulting overall uncertainties due to combined effects of both variability and uncertainty are smaller (usually by a factor of 3–4) than the crudely multiplied model-specific overall uncertainty ratios. Future research will need to examine the impact of potential dependencies among the model components by conducting a truly coupled modeling analysis.     

Impact of chronic exposure to low doses of chlorpyrifos on the intestinal microbiota in the Simulator of the Human Intestinal Microbial Ecosystem (SHIME®) and in the rat

The impact of the insecticide chlorpyrifos (CPF) on the mammalian digestive system has been poorly described. The present study aimed at evaluating the effect of chronic, low-dose exposure to CPF on the composition of the gut microbiota in a Simulator of the Human Intestinal Microbial Ecosystem: the SHIME® and in rats. The SHIME® comprises six reactor vessels (stomach to colon). The colonic segments were inoculated with feces from healthy humans. Then, the simulator was exposed to a daily dose of 1 mg of CPF for 30 days. The changes over time in the populations of bacteria were examined at different time points: prior to pesticide exposure (as a control) and after exposure. In parallel, pregnant rats were gavaged daily with 1 mg/kg of CPF (or vehicle) until the pups were weaned. Next, the rats were gavaged with same dose of CPF until 60 days of age (adulthood). Then, samples of different parts of the digestive tract were collected under sterile conditions for microbiological assessment. Chronic, low-dose exposure to CPF in the SHIME® and in the rat was found to induce dysbiosis in the microbial community with, in particular, proliferation of subpopulations of some strains and a decrease in the numbers of others bacteria. In compliance with European guidelines, the use of the SHIME® in vitro tool would help to (1) elucidate the final health effect of toxic agents and (2) minimize (though not fully replace) animal testing. Indeed, certain parameters would still have to be studied further in vivo.     

Interrelationships among foreign direct investments,renewable energy,and CO2 emissions for different European country groups: a panel ARDL approach

Environmental Science and Pollution Research - This study estimated unbalanced panel data analysis to investigate the relationship among CO2 emissions, GDP, renewable and non-renewable energy...     

Bioconcentration of two pharmaceuticals (benzodiazepines) and two personal care products (UV filters) in marine mussels (Mytilus galloprovincialis) under controlled laboratory conditions

Bioaccumulation is essential for gaining insight into the impact of exposure to organic micropollutants in aquatic fauna. Data are currently available on the bioaccumulation of persistent organic pollutants, but there is very little documentation on the bioaccumulation of pharmaceuticals and personal care products (PPCPs). The bioconcentration of selected PPCPs was studied in marine mussels (Mytilus galloprovincialis). The selected PPCPs were two organic UV filters, i.e., 2-ethylhexyl-4-trimethoxycinnamate (EHMC) and octocrylene (OC), and two benzodiazepines (BZP), i.e., diazepam (DZP) and tetrazepam (TZP). Laboratory experiments were performed in which M. galloprovincialis was exposed to these compounds either directly from water, for the less lipophilic substances (BZP) or via spiked food for lipophilic UV filters. M. galloprovincialis uptook and eliminated BZP following first-order kinetics. The biological half-life (t (1/2)) of TZP was 1.4?days, resulting in a bioconcentration factor of 64 and 99?mL?g(-1) dry weight (dw), respectively, for 2.3 and 14.5?μg?L(-1) of exposure, while the biological half-life (t (1/2)) of DZP was 0.4?days, resulting in a bioconcentration factor of 51?mL?g(-1) dw for 13.2?μg?L(-1) of exposure. The uptake of UV filter was rapid in mussels, followed by elimination within 24?h. EHMC increased from 15 to 138?ng?g(-1) dw in 1?h and decreased to 25?ng?g(-1) after 24?h for 11.9?μg?L(-1) exposure. OC reached 839?ng?g(-1) dw after 1?h and decreased to 33?ng?g(-1) after 24?h for 11.6?μg?L(-1) exposure. However, EHMC and OC were slightly accumulated in 48?h, i.e., 38 and 60?ng?g(-1) dw, respectively.     

Anaerobic Biodegradation of Polyvinyl Alcohol Modified by Extracellular Polysaccharides

This work focused on anaerobic biodegradation of blends composed of glycerol-plasticized polyvinyl alcohol (PVA) and biopolymer (starch, gellan, xanthan) in an aqueous environment, after inoculation with digested activated sludge from a municipal wastewater treatment plant. Glycerol degradability is comparable to degradability of used modifying agents. Modifying agents added in the 20–40 wt% range proportionally increased biodegradation degree (D_t) calculated from balance of transformed carbon in the system. Biodegradation degree of polysaccharides and glycerol attained 95% and over. For PVA it was only 6.5% (in breakdown times up to 500 h). Content of polysaccharides favorably affects biodegradation degree of polyvinyl alcohol blends, but at the expense of reduced mechanical properties of resultant products.     

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Can pine needles indicate trends in the air pollution levels at remote sites?

Data from ten years of integrated monitoring were used here to evaluate whether pine needles are a feasible tool for an assessment of long-term trends of the atmospheric contamination. Pine needles collected once a year were compared to high volume air samples collected for 24 h, every 7 days, and passive air samples integrated over 28-day periods. Results showed the same concentration patterns of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) captured in needles and high volume samples. Passive air samplers were less efficient in sampling the particle-bound compounds. Theoretical air volume equivalent to each needle sample (V_EQ) was calculated as a ratio of the needle concentration over the mean air concentration. Results indicated different equivalent volumes for PAHs and organochlorines, possibly due to the faster degradation rates of PAHs in needles. The most important finding is that in the long term a needle monitoring gives very similar information on temporal trends of the atmospheric pollution as does a high volume air monitoring.